Employ our granular pH Up to elevate the pH level of your pool or spa! Preserving an appropriate pH level in your pool/spa water is crucial for ensuring cleanliness and safety for use. Elevated pH levels can also compromise chlorine effectiveness, leading to further issues. Numerous factors influence the pH level of your water, including pool usage, precipitation, and animal waste. Hence, it's imperative to conduct pH tests at least every 3 to 4 days.
100% sodium carbonate.
Corrects acidic water conditions.
Slows the rapid dissipation of chlorine caused by acidic water.
Reduces eye irritation by reducing acidity.
Reduces corrosion of pool equipment
Our pool pH increaser comes in granular form- available in multiple sizes
Soluble in cold water
Helps maintain the optimal pH level for pool and spa water between 7.2 and 7.6 ppm.
Available in 3 sizes to suit your needs! (500 grams, 2 KG, 8 KG)
TO RAISE pH LEVEL:
Test water to calculate how much pH Up is necessary
Mix pH up with water and add to pool
Adding pH Up will help raise your pH level to land in the desired range. It is best that you add a little bit at a time and then test your pH level accordingly. Do this until you have reached the desired amount.
READ THE LABEL BEFORE USING:pH UP is used to raise the pH for safe swimming. The ideal range for 7.6. High acidity (low pH) causes eye irritation and rapid chlorine loss.
Reduces Irritation by reducing water acidity
Keeps Water Clean
Keeps Water Clean
How To Use
Test water
Add pH Up
Mix pH Up with water and add by sprinkling over the surface of the pool. The recommended dosage according to your pH level is:
- 6.8 - 7.2 use 75g/10,000L
- 6.5 - 6.8 use 100g/10,000L
- Below 6.5 use125g/10,000L
Test water
Test Water AGAIN and check pH level.
Repeat
Repeat the process all over again until you reach the desired amount.
Choosing a selection results in a full page refresh.